What Is Cosmetic Roofing Damage?
Cosmetic damage is non-structural damage that only affects the surface or appearance of the roof, without affecting the structural integrity. Examples of cosmetic damage to a mobile home roof would be staining, fine scratches or light scratches, fading out of colour or loss of gloss from the paint or surface finishes.
Cosmetic damage can occur to a roof surface for a variety of reasons. Often cosmetic damage will occur purely as a result of age and deterioration. A roof coating can fade due to the effects of UV rays, rain, tree sap and general weathering. The roof surface may look less tidy, but it is important to remember that the integrity of the coating has not been compromised.
Cosmetic repairs to roofs are undertaken where the appearance of the roof needs to be enhanced. The majority of cosmetic problems can be resolved through effective cleaning, re-sealing or re-coating of the roof membrane. Cosmetic problems do not imply a breach in waterproofing integrity of the roof.
What Is Corrosive Roofing Damage?
Corrosive damage is a different type of damage. Corrosion is a process between a metal, moisture and oxygen over time that causes an oxidation process. The corrosive damage to a mobile home usually involves the metal sheet roofing, fasteners, seams and joints.
The key difference between cosmetic wear and corrosion is the fact that corrosion actually eats away at the material it affects. What starts out as a small area of red rust can quickly spread and grow until the metal has thinned to such an extent that it becomes a sieve of holes and voids. Once the protective barrier of the coating has been breached, the corrosive process can proceed at an accelerating rate.
The coast is a highly corrosive environment for structures and components. Salt and moisture combine to create a corrosive cocktail that can cause massive problems for any un-protected metal components.
Why Corrosive Damage Is Often Misidentified
Early stages of corrosion may appear to be nothing more than staining. In many cases the brown spot and the paint blister can be merely painted over and are not given further thought. In many cases when the blister is repainted, the moisture under the paint film has already penetrated the film and caused further corrosion under the seemingly intact film.
Corrosion stains may appear around the seams of the roof or around the heads of the fixings. Weep holes are designed to allow water to run out of the structure. Rusting of the fixings can prevent a tight seal being achieved around the screws allowing water to enter.
That’s why a professional inspection is important. Even if your roof looks like it needs repair or replacement due to age, there may be some underlying corrosion that could change the needed repairs or replacement if not detected. Corrosion is a process that can take years and even though the roof may look bad it could still be some years away from needing major repairs or replacement if it can be contained to a small area.
The Risks of Ignoring Corrosion
Unless rectified, the effects can be catastrophic. As corrosion progresses, the structural strength of the metal is slowly lost, and pinholes begin to appear. Even the smallest hole in the metal can allow an astonishing amount of water to enter the roof space. Water ingress to the roof cavity can cause damage to insulation, timber rot to the structure and unsightly staining to the ceiling.
Water ingress is a recurring problem in mobile homes. The limited space in which mobile homes are constructed means that ingress of water from any source can easily spread across interior surfaces, potentially resulting in mould growth and future expensive repairs.
Although the structural integrity of a building may not be dramatically affected by the presence of corroded fixings and joints, they can become a critical issue in high wind speeds such as during a storm. What may have begun as a relatively minor example of rust damage can quickly become a serious structural problem.
Prevention and Maintenance
Regular roof inspections are the best way to prevent corrosion damage from becoming an issue. SH Leisure Services check:
- Roof seams and joints
- Fixings and screw heads
- Areas where water naturally pools
- Edges and gutter lines
The key to repair is early intervention. In many cases, a small amount of sanding and application of a rust inhibitor will remove most surface rust before the damage becomes too severe. Mobile home roof coatings will also act as a preventative measure to inhibit moisture and UV damage to your home.
Gutters need to be cleaned and there needs to be adequate drainage to prevent standing water which is one of the main causes of corrosion.
Why This Matters When Buying a Mobile Home
When purchasing a mobile home, as a buyer you need to understand the difference between cosmetic and corrosion damage to ensure you have a good deal. A roof that simply needs a clean and re-sealing is a completely different project to one that requires major structural repairs.
All properties are thoroughly inspected for roof condition prior to listing for sale and full disclosure is provided to buyers. Cosmetic damage can be easily repaired without major work.
A well-maintained roof can add years to the life of your mobile home, as well as help to preserve the value of your home. With a little time and effort each year, you will have less to worry about in terms of maintenance for the rest of the year.
